UCON Channel/Protocol Diagnostic: The UCON has detailed protocol or channel diagnostics built right in the software. You simply enable these under the Channel Properties General tab. Below is an image of the data being transferred (TX) from the Server in green and the return (RX) data from the device in white. You can even change the coloring for your needs by right clicking on the screen and choosing options. The image above shows the image above shows the data in Hex Mode, but it is also available in Mixed Mode which will show the type characters as ASCII String data for quick reading and testing.  The data can be paused and reset at any time. You can also right click on the screen and copy all the data captured into a text format with timestamps.